Mastercam Anilam 6000 Post Processor Needed

[Brokethisweek]

Does anybody have a Mastercam Post Processor for Anilam 6000I ?

[macmub]

Hey mate, ive got a post for a 6000i control, im running mastercam 9.1?

let me know.

[Peter Crisler]

Hey mate, ive got a post for a 6000i control, im running mastercam 9.1?

let me know.

Would you be willing to trade notes? I have a post that I modified from one that was from MasterCam 9.0 written for an Anilam 5300. It works but I have a couple of questions that I have not been able to find answers for.

[Peter Crisler]

Hey mate, ive got a post for a 6000i control, im running mastercam 9.1?

let me know.

Do you want to sell it? I'm interested.

[drdroopy]

i am also in need to this post processor if you could help me out.

[Peter Crisler]

i am also in need to this post processor if you could help me out.

What do you need? I think I have mine working correctly.

[drdroopy]

looking for the control, .pst and .mmd file for the anilam 6000i controller, if you could send to me william.jones@gdit.com that would be great!!!

[rayje]

will my mastercam anilam 3000m post work on an Anilam 6000m controller..... i want to output in .m not .g At the moment i am more comfortable with a post outputting in the conversational .m

[kmgcmk]

will my mastercam anilam 3000m post work on an Anilam 6000m controller..... i want to output in .m not .g At the moment i am more comfortable with a post outputting in the conversational .m

I have an Anilam 3000m controller and need the post processor for it. Could you possibly send it to me at kmgcmk@gmail.com? Thanks.
Kevin

[Peter Crisler]

I have an Anilam 3000m controller and need the post processor for it. Could you possibly send it to me at kmgcmk@gmail.com? Thanks.
Kevin

I have no idea whether my 6000i post will work with a 3000m. We have 3 Anilam controllers in our shop: 2 - 4200T's on 2 H.H. Roberts CNC lathes and the 6000i on a Kent vertical machining center. That is the extent of my Anilam knowledge/experience, but from what I do know, I don't think a 3000m is anywhere close to the same as a 6000i.

[Peter Crisler]

will my mastercam anilam 3000m post work on an Anilam 6000m controller..... i want to output in .m not .g At the moment i am more comfortable with a post outputting in the conversational .m

I don't think a 3000m post will work on a 6000i controller as they are not close to the same thing. And, I have never used .m language. I grew up on G & M code. Never used conversational.

[dserratt]

I could greatly use a copy of the 3000m post
Thanks