Thread mill help

[dpark1]

Using version 9.1-i am thread milling a M36 x 4.0 thread (i.d) what do i type in my thread pitch value(under parameters)? And also my major dia? (36 x .03937=1.41732) So 1.41732 is correct?

[Derek Goodwin]

And also my major dia? (36 x .03937=1.41732) So 1.41732 is correct?

That is the correct conversion, use the same conversion for you pitch value
4mm x .03937=.15748"

[dpark1]

Thanks for the reply, i was having a brain freeze. It's been awhile since i have had to mill metric threads!!

[lovecnc2003]

thanks

[Superman]

Originally Posted by lovecnc2003 thanks

Hey lovecnc2003
Can you be a little more on the other side of the fence with your replies,
not bad 41 out of 46 posts are one worders
http://www.cnczone.com/forums/search...archid=3889955
or is "THANKS" the only word you know ???


You probably are trying to get your post count up

[Enraged]

Originally Posted by Superman Hey lovecnc2003 Can you be a little more on the other side of the fence with your replies, not bad 41 out of 46 posts are one worders http://www.cnczone.com/forums/search...archid=3889955 or is "THANKS" the only word you know ??? You probably are trying to get your post count up

maybe he found the info useful and decided to say "thanks" in appreciation?

[tobyaxis]

Originally Posted by Enraged maybe he found the info useful and decided to say "thanks" in appreciation?

That is a possibility but I think Superman has a point, LOL