4th Axis Tutorial

[ALpmc]

Hello everyone!

I've been using MC v9 for years now and I have just added a 4th axis to my benchtop. I need a tutorial. I have used the MC tutorials before and though I find them lacking I can usually figure out the gray areas.

I'm on a limited budget and I'm looking for a copy of the "Mastercam 4 & 5 Axis Mill Training Tutorials V9".

I would appreciate anyone who has or knows someone who is willing to part with a used copy in any condition at a reasonable price.

I would also like the Solids add-on for v9 if anyone has some info.

Thanks!

[Mike Mattera]

I dont think you'll find this tutorial lacking...
http://www.tipsforcadcam.com/product/TFM-CDRotaryV9

Mike Mattera

[kojack]

Originally Posted by Mike Mattera I dont think you'll find this tutorial lacking... http://www.tipsforcadcam.com/product/TFM-CDRotaryV9 Mike Mattera

I have this CD .. well I have The whole set V9

I struggled for years always had some problem

Got the Cd's Now I can program parts So fast ..

People just need to get them they are that GOOD !!!

[ALpmc]

Thanks for the replies! As I stated, I'm on a limited budget and feeling the economical crunch! While I think that the "Tips" cd's would be the best for me, they are a little pricey and I have a family to consider. At best, I was hoping for a used copy of the MC tutorial, but I thank you guys for your suggestions.

[kojack]

Originally Posted by ALpmc Thanks for the replies! As I stated, I'm on a limited budget and feeling the economical crunch! While I think that the "Tips" cd's would be the best for me, they are a little pricey and I have a family to consider. At best, I was hoping for a used copy of the MC tutorial, but I thank you guys for your suggestions.

If you look on ebay he does special offers now and then

The money you spend on the CD you will make back on your first job ...

I have a hard time learning things sometimes and this made it real easy

[jeffrey001]

Hi Alpmc.

Just sent PM to you, Jeff

[ALpmc]

kojack Thanks, I will keep my eye on the bay.

Thanks for your suggestion in your PM Jeff.