LinkBack URL
About LinkBacks
here ya go
Can someone convert Mastercam .MC8 files to DXF,STL or .IGS for me.
Thanks
Bruce
here ya go
Thanks again
Bruce
Bruce
WHAT PROGRAM DID YOU USE?
Originally Posted by rrrrrgh
WHAT PROGRAM DID YOU USE?
Mastercam can do it.
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
IS IT UNDER THE CONVERTERS? I DO NOT HAVE .DXF AS AN OPTION. IS IT SOMEWHERE ELSE?
Converters/AutoDesk/Write File
Select DXF from the TYPE list.
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
BTW, typing in all caps is considered YELLING on the internet.
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
THANK YOU ,THAT WORKED GREAT!!!! I REALLY LIKE THIS WEBSITE!!! P.S. I AM HARD OF HEARING THAT IS WHY I AM TYPING IN ALL CAPS.!!!THANKS AGAIN. SCOTT
THANK YOU ,THAT WORKED GREAT!!!! I REALLY LIKE THIS WEBSITE!!! P.S. I AM HARD OF HEARING THAT IS WHY I AM TYPING IN ALL CAPS.!!!THANKS AGAIN. SCOTT
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
