| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-26-2009, 05:08 PM
| |||
| |||
G'day . I have a probelm with a machine with a heidenhain 155p controller on it. We are trying to transfer a master cam program from the pc to the controller but are experiencing problems. We have a simular controller 155a on a different brand of machine and it transfers fine. I have set buad rates, bits , parity and use the same lead on the other machine. I was wondering if the file extension migh be different eg program number 210.%. It won't read in or out. Running out of ideas. Any help would be appreciated. Cheers Jim  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hiedenhain TNC2500 | nikinet | Bridgeport and Hardinge Mills | 2 | 01-28-2010 07:16 PM |
| Need Help!- hiedenhain tnc 155 | ivan mccullen | Machine Problems, Solutions , Wireless DNC, serial port | 0 | 07-06-2008 05:27 AM |
| cutting hiedenhain scales | MIKE JEFFERS | Calibration & Measurement | 3 | 08-18-2007 03:51 PM |
| TNC 155P Parameters | RichardCop | CNC Machining Centers | 1 | 01-31-2007 09:43 PM |
| Hiedenhain Tnc 430 Control | Tulak | General CAM Discussion | 8 | 06-10-2004 08:22 AM |
| | |
Linear Mode
