Need Help!- x3 solidworks

[encarlisle]

when opening sworks o9 inside x3 how do you suppress solids or wireframe
so you see base chain of solid only. when i go to solid manager the suppress is grayed out ie not accessible help!!

[makingchips]

I have never had that grayed out before. Select only/entities/solids window the part. Down bottom click on levels or right click on levels I'm not looking at it at the moment. A box will open select move and chose a level number click OK. If it worked open your level manager and turn off what you don't want to work with.

Hope this helps.

MC

[Mike Mattera]

If you brought the solid in from SolidWorks, you wont have a History where you can "suppress" features. You can only do that in X3 if you have SolidWorks on the same system as Mastercam.

If you want to see the wireframe only, you have 2 options...
1 - Move the solid to a different level and turn the display of that level off. Or...
2 - Do a "Blank" and pick the solid. The solid will disappear. Use UnBlank to being it back.

Mike Mattera