Haas Post = No G76 with spindle orient MC9

[kojack]

how could I add a custom boring cycle that would post G76 with

Q and I an j locations for retract ?

Thanks

[mastercamguru]

Originally Posted by kojack how could I add a custom boring cycle that would post G76 with Q and I an j locations for retract ? Thanks

Depending on the post you are using, you might already have that switch in your post.

Open you post and search for haas_drill or haas. If it is in your post, change the 0 to a 1 (or no to yes).

If it isn't I can still help you.
What post are you using?

If you aren't using mpmaster, you should give it a try.

You can find it at emastercam.com