My Mastercam X tutorial for NOOBS

[jeremy83]

Hi just wanted to post my crash course in Mastercam X mill 3 axis tutorials.
its a quick set of lessons to help people get into creating mastercam programs.

This is a crash course and will show you everything you need to know to create simple geometry and tool path.

http://www.freewebs.com/jermboy

advanced lessons will be added in the near future. 3D Cadd work etc.

[cob]

Originally Posted by jeremy83 Hi just wanted to post my crash course in Mastercam X mill 3 axis tutorials. its a quick set of lessons to help people get into creating mastercam programs. This is a crash course and will show you everything you need to know to create simple geometry and tool path. http://www.freewebs.com/jermboy advanced lessons will be added in the near future. 3D Cadd work etc.

hey jeremy thats pretty cool
good looking out
hope to see the other ones comming up

[jeremy83]

Thanks Its alot of work! let me know if anything is not correct, or needs clarification.

[Derek Goodwin]

Nice Jeremy, good progression from the initial freehand paint call outs to the higher resolution in the later tutorials. Have you tried snagit?http://www.techsmith.com/screen-capt...FRJdxwod7WF9dQ it's really great for screen capture and markup, and easy to use

[jeremy83]

Originally Posted by degmc Nice Jeremy, good progression from the initial freehand paint call outs to the higher resolution in the later tutorials. Have you tried snagit?http://www.techsmith.com/screen-capt...FRJdxwod7WF9dQ it's really great for screen capture and markup, and easy to use

Thanks, The later shots are generated with snag it! Its awsome!!

[jeremy83]

Added Flash based Pocket tutorial! The freewebs editor cuts off a small portion of the screen, but its not that bad.

http://www.freewebs.com/jermboy/pockettutorial.htm

[jeremy83]

Added 3D extrude tutorial http://www.freewebs.com/jermboy/lesson5.htm

[skaha]

Thanks very much for your work on these, very helpfull.
Terry

[cadcam]

Jermey, see if this helps with your solid sample.
Please review and enjoy the music.
http://www.mastercam-cadcam.com/videos/basicsolid.wmv

[jeremy83]

Originally Posted by cadcam Jermey, see if this helps with your solid sample. Please review and enjoy the music. http://www.mastercam-cadcam.com/videos/basicsolid.wmv

Nice, well done! Thats the first time I have seen x3, I was programming in x2 at work and the dealer gave me the demo for Mastercam X, which is whats used in my tutorial.

Do I have permission to use this video? (altho my freewebs server will butcher it)

[cadcam]

Do I have permission to use this video? (altho my freewebs server will butcher it)

Sure go ahead but the crest marking must stay.

Hope this was helpful.
PS we just released MU1 for X3 in the last few days.

[Mike Mattera]

When teaching Mastercam, It's a good idea NOT to call it a "CRASH" course (all in fun)

Mike Mattera