LinkBack URL
About LinkBacks
What re you trying o save it to? Right click check Properties and see if i is set for read only
| | |
I download a dxf file from this site, made some changes and tried saving it. I get a warning saying "File Cannot Be Opened. Check Read Only Attribute." What am I doing wrong?
What re you trying o save it to? Right click check Properties and see if i is set for read only
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
I was trying to save it under a different file name by using save as after I made my changes to the geometry. I checked the properties of the original file and the read only box is not checked. Forgive me as I'm a newbie to all of this and I'm trying to learn Mastercam X.
what are you trying to save it to? (ex. Hard drive, CD, usb key)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
Hard drive
Posting Permissions
| | |
