Minimum laptop requirements


Results 1 to 5 of 5

Thread: Minimum laptop requirements

  1. #1
    Member
    Join Date
    Dec 2005
    Location
    madagascar
    Posts
    436
    Downloads
    0
    Uploads
    0

    Default Minimum laptop requirements

    I took a look at the website for miniimum system requirements for Mastercam.

    "1.5 GHz 32-bit Intel®-compatible processor. 64-bit Intel®-compatible processors are supported"

    I am leaning towards Windows Vista
    I was wondering what the experience of forum users with AMD, Centrino, Celeron etc


    Is there anythinng I should definatelly stay away from?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2008
    Location
    Canada
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    I'm running MasterCamX on a 2 year old T41 Thinkpad with 1.6 Ghz & 1 Gig of RAM. It runs very smoothly.

    Hope this helped,

    fozzie



  3. #3
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    stay away from Celeron as they are low of the math processor for Mastercam. the other in most cases will do. but make sure to look at video as I say to stay away from integrated video. you want separate video. I suggest not using Vista unless you are running MCX2 mr2 or higher.X3 runs better in vista then X2 mr2.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  4. #4
    Member
    Join Date
    Dec 2005
    Location
    madagascar
    Posts
    436
    Downloads
    0
    Uploads
    0

    Default

    Thanks for the tips



  5. #5
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Also min of 1 gig of ram in XP and min of 2 gigs in vista.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Minimum laptop requirements

Minimum laptop requirements