Need Help!- MCM9 POST PROCESSOR FOR MELDAS 500

[bob@apc]

hi, we are in the process of streamlining our post and are about 99% with our meldas 500 series post. i have omitted line numbers at each line within my post. my code now looks like this, (i editted the work out of the program to shorten my post here.) i want the post processor to increment in N numbers at each new tool comment area. as of now i edit my program at each N number.

%
O0000 (FOOT PRO1 OP4 - STAGE-NUMBER / PART)
(14-08-08 / DATE=DD-MM-YY)
(11:31 / TIME=HH:MM)
(REV. - 1)
(PROGRAMER - THOSE THAT KNOW)
(PCV55.PST)

N ( T7 = 3/16 FLAT ENDMILL )
G28Z0. T7
M6
T17
G90 G54 G0 X1.6248 Y1.0744
S5000 M3
G43 H7 Z1. M8
Z.1
(WORK)
G0 Z1.
Z1. M9
G28 Z0. M5
M1

N ( T17 = 3/4 FLAT ENDMILL )
G28Z0. T17
M6
T118
G90 G54 G0 X1.5411 Y-1.1261
S713 M3
G43 H17 Z1. M8
(WORK)
G0 Z1.
Z1. M9
G28 Z0. M5
M1

N ( T118 = 1 INCH CORNER RAD MILL 0.125 RAD )
G28Z0. T118
M6
T7
G90 G54 G0 X1.5705 Y-.5643
S534 M3
G43 H118 Z1. M8
Z.1
(WORK)
G0 Z1.
Z1. M9
G28 Z0. M5
G28Y0
M30
%

thanks, bob