G2 & G3 commands reversed in NC file

[Cadhopper]

I'm using MasterCAM X2 with an Intelitek Prolight 3000 lathe. Our Mastercam vendor wrote a post processor file for the machine but the G2 and G3 commands are reversed. If I change them manually in the post file the parts runs great. I hate to bug the vendor again so if it's something that is easily fixed and I would prefer to do it myself. Do you guys think this is something that can be fixed in the post processor file or is there a problem in the machine configuration file?

Also, How can I change the post processor to give a M02 command instead of the M32 command to end a program. Unfortunately the Prolight 3000 does not understand the M32 command.

PS: If anyone out there has a good post processor file for the Intelitek Prolight 3000 lathe and the Super Prolight mill with 4th axis I would love to try them out.

Thanks for the help.

[advt001]

I would make the Mastercam dealer fix the post.After all you paid for it.

[Cadhopper]

Very true but I figured if it was an easy fix I would do it myself so I could learn a little more about how MasterCam is configured.

[chuy]

make a copy of original post...then look for the m32's and change them to m02, and try the post..as far as the reversed arcs not sure....sorry make him fix it.