LinkBack URL
About LinkBacksI am attempting to thread mill with mastercam (version 9.1). I tried it with a 1 inch by 8 pitch, using a 3/4 inch threadmill cutter (dovetail type), but I am missing something on my thread mill parameters page. Any help would be appriciated.
I am attempting to thread mill with mastercam (version 9.1). I tried it with a 1 inch by 8 pitch, using a 3/4 inch threadmill cutter (dovetail type), but I am missing something on my thread mill parameters page. Any help would be appriciated.
you have an 8. inch thread pitch ya thats 8. inch's it should be .125 thread pitch
you never know what you can do, until you have to undo something you have done!
WOW!!!!!!!!!!!! That was it. Thanks for a quick response.
No problem any time
you never know what you can do, until you have to undo something you have done!
Posting Permissions
