| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-23-2008, 04:50 PM
| |||
| |||
Dear All This might have been posted before but I could not find it. I am machining a boss with a hole in it and I need to chamfer the top on the hole. All drawn in wireframe then converted to solids but when I go to chamfer the hole Mastercam selects the edge but then angles the chamfer towards the centre of the hole, putting material on not taking it off. Any assistance here would be gratefully received Paul  |
|
#2
02-23-2008, 06:34 PM
| ||||
| ||||
| you might be picking the wrong geo if the chamfer is drawn. use the outer profile edge.and set the Z hight to the top of the chamfer and let the 2dchamfer option add to it to get it correct.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Chamfer | CharlesM479 | Solidworks | 3 | 04-11-2007 11:13 PM |
| Trying to chamfer some letters | justCNCit | Rhino 3D | 29 | 02-08-2007 02:41 AM |
| chamfer with a fade out. | tnik | Solidworks | 5 | 02-07-2007 04:00 PM |
| Using a 45 deg chamfer tool | COPO427 | Mastercam | 14 | 01-14-2007 12:28 PM |
| Chamfer on surface | Beaker | Mastercam | 5 | 11-15-2006 04:32 AM |
| | |
Linear Mode
