Having trouble loading program using Mastercam"s Cimcov5 in my Haas

[Robert Timby]

I'm having a problem loading a program into my Haas. I can get it to receive the program but after the program finishes in Cimco v5 the haas just keeps saying that it is loading. I know that i forgeting something but what? Any help?

Thanks for the help

[crazythunder]

Make sure you got your % at the end on the file.

[Robert Timby]

thanks for the help but that was the first thing i checked in the program, it seem that i'm missing something else.

here are my setting that i using:

baud 11520
parity even
data bits 7
stop bits 1
flow none
dtr enable is checked on
rts enable is checked on

xon 17
xoff 19

any ideas?

[jmparis]

Try these settings and after you get it to communicate you can then go ahead and start turning it and see how fast you can get it to go

9600 bps
7 Data Bits
2 Stops Bits
Even Parity
Xon/Xoff

Basic starting point when figuring comms