Impeller Help

[Tugiyana]

I just learning, and I have tried this part a day. Could someone explain me.. how to finishing impeller blade in my part..

[Steve Arteman]

I have designed and built these using Mastercam many times. I use multiaxis swarf to finish the blades. here is the backplot toolpath video,

http://www.cad2cam.net/swarf/swarf.html

any additional help email me at steve@cad2cam.net.
Steve

[Tugiyana]

Thank U for your advised Steve.. i have tried and it work clear..

Best regards

[Steve Arteman]

you are welcome
Steve
www.cad2cam.blogspot.com

[kiemkhach]

Interesting part for me to learn

I like to create the impeller look like your part ,I already make a base ,but I stuck on create the blade
Tugiyana could you or anyone give me an idea or tutorial how to create the blade .

Thank you in advance

[Steve Arteman]

what is the blade detail?
steve
www.cad2cam.net

[Mike Stevenson]

Both the Kps3.zip & Impeller.zip files on this page are junk. Any way the rest on the world can view them?

[cadcam]

I have to ask Mike why you make a statment of the they are Junk. They are good files one is a Solid works file that comes in clean and the other being the MCX file and it comes in clean. I havent opened the other but the first one is a GOOD file. What are trying to open it with? What type of file do you need?

[Mike Stevenson]

Why cadcam? Because I could not get either one of them to open with the corresponding applications.

EDIT - I tried it again today and I was able to open the Solidworks file. But I still can't get the Mastercam X file to open to see the toolpaths.

[Steve Arteman]

Mike,
There is no toolpath on the mcx file The only other toolpath is the link I put up.
http://www.cad2cam.net/swarf/swarf.html
Steve
www.cad2cam.net

[Mike Stevenson]

Thanks Steve....nice name. :P

[cadcam]

Mike, I take it you are trying to open it with Mastercam . What version of mastercam X if I may ask?
Do you get an error when you try to open it?