How to create Flowline Toolpath

[jmparis]

Oh I see Mr Paris thought you would come play here now. How was X-mas?

I was slumming and thought I'd poke my head in here for bit.

We had a good Christmas Jay, I hope you and yours did as well

[Steve Arteman]

here is another blend toolpath that may help somebody.
I had to add surfaces for the tool to cut the block detail clean. Another blend example. flowline didn't work here
http://www.cad2cam.net/blend1/blend1.html
Steve
www.cad2cam.blogspot.com

[crazythunder]

Steve I helped that person with that part as well. Blend was the only toolpath I could see that would do what they needed. Good job.

[Steve Arteman]

Thank you Ron, I like using this toolpath on many things as you can tell.
Steve
www.cad2cam.net

[kiemkhach]

Helpfull tutorial
Thank you so much Steve Arteman

Originally Posted by Steve Arteman here is another blend toolpath that may help somebody. I had to add surfaces for the tool to cut the block detail clean. Another blend example. flowline didn't work here http://www.cad2cam.net/blend1/blend1.html Steve www.cad2cam.blogspot.com

[Steve Arteman]

kiemkhach,
you are welcome, I'm glad it was helpul. There are some othes help videos at
www.cad2cam.blogspot.com
Steve