Matsercam Wire cutting die pockets w/ 1 deg. relief taper

[K.Mays]

I would greatly appreciate help getting mastercam 9 Wire to to cut die pockets with a 1 degree taper below a .125 land. I don't want to program the z axis. The machines are a Charmille and Fanuc.

[Steve Arteman]

K mays,
This is a quick video I did, I'm ot quite sure this is what you are after. If not let me
know. http://www.cad2cam.net/wire v9/wire v9.html
steve
steve@cad2cam.net
www.cad2cam.net

[Steve Arteman]

try this http://www.cad2cam.net/wire%20v9/wire%20v9.html

[Steve Arteman]

Kmays did this help?
steve
www.cad2cam.net