Looking MasterCam Book

[kiemkhach]

Hi :-) All
I am newbie

I am looking Mastercam X books,the book must be cover all fuctionality of the following features such as Surface,Curve,and including some fuctions as XForm Project,XForm Translate 3D,XForm Rectangular,and XForm Roll.
If anyone know the book cover all functions above

Please drop me a line .

Thank you for your help,and your time to reading my msg

[cadcam]

Review this link and look at the Hand books Volume 1 and 2 this has exactly this broken down.

Link: http://www.emastercam.com/resources/

[gargodude]

I have a "Mastercam X Training Tutorials" book. I bought it new a couple of years ago and have hardly looked at it. It is in perfect condition. Copyright date July 28, 2005. It covers everything from drilling to surfaces. I paid $72 for it. You can have it for $40.

[usarmy87]

try www.techedu.com under books tab and look for mastercam..
prices are cheaper... :-)

cdn or us money is only off around $1.00 ,


Saturday, December 1, 2007 120 Canadian Dollar = 120.342 US Dollar
120 US Dollar (USD) = 119.659 Canadian Dollar (CAD)

[kiemkhach]

Oh yeah! The price on techedu.com so cheap
I will make an order volume 1 and volume 2 as Cadcam recommend .

Thank you so much

[cadcam]

you guys crack me up. the prices are not cheaper there just not in Canadian money.these are the prices I charge to sell these books out of are office.
But the two you are looking at with get you what you are looking for.

Have fun and remeber we are here to still help.

Later Cadcam

[Mastercam User]

cadcam, since you sell the Mastercam Handbooks I have a question. I have a old Mastercam Handbook for X Volume 1. On page 4-47, Exercise 4-10 Wedge With Arc, using the right view how would I go about drawing this?

Also, what setting do you change in Mastercam X2 to get the yellow background in the dialog boxes where you enter information like you have when you post screen shots.

Thanks In Advance.

[cadcam]

Morning MU and I will have to refrence the page you speak of to see what you are speaking of to answer.
as for the second thought this is part of X2 Mr2 release.

[Mastercam User]

This is what I am not sure how to draw




http://www.mediafire.com/imageview.p...wkg0im&thumb=4

[cadcam]

So you have drawn this and want to know how?

[Mastercam User]

I edited the dimensions to show you what I want to draw. I do not know how to draw it. The edited dimensions do not reflect what is drawn.

[cadcam]

So the dim don't count then that makes hard without numbers but I guess i should review the book tonight when I get home for this shape and get the info from this page correct?