| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-07-2007, 05:59 PM
| |||
| |||
Im trying to learn MC 9.1 by myself, but I cant figure out how to do the toolpaths. Im trying to get a contour around my 3d model, but when I get to an edge with a different z value I cant continue my chain. can anyone help me? Ill include my file to show you what Im working on.  |
|
#2
11-07-2007, 08:11 PM
| ||||
| ||||
| If you are trying to just run a cutter around the outside of the part you need to take the outside edge curves and squash them so you have one level drive chain. I would but those edge curves on a separate level so you can just work with them alone. If you need any help just let me know. I will help anyway I can.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
11-08-2007, 04:44 PM
| |||
| |||
| I kinda figured that was what I was going to have to do. I need to figure out how to squash them. Would it be a good idea to copy all my construction geometry and then place that into anew level and squash it or just squash the construction geomerty I have already? |
|
#4
11-08-2007, 08:31 PM
| ||||
| ||||
| is the part suppose to be severial parts as I see there are 6 solids.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
#5
11-11-2007, 03:30 PM
| |||
| |||
| No its one solid part I couldnt figure out how to make it from one solid body. I really only need the outside profile as a post since I will just be posting that part as g code and using the dimensions in our prototrak dpm v5 at work. As far as i know they didnt opt for the g code loader for the machine. |
| Sponsored Links |
| |
|
#6
11-11-2007, 04:16 PM
| ||||
| ||||
| Well who ever made this file did not compile it as single solid but no worry for what you want is on another level. Use this link and download this zipped AVI file taking your file and Squashing it. http://www.mastercam-cadcam.com/squashfileinv9.zip
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
#7
11-12-2007, 06:19 PM
| |||
| |||
| I made that 3d model  considering I didnt know what I was doing I think it turned out pretty good Thats an awsome avi. Not sure if I have the chooks ill need to look. |
|
#8
11-12-2007, 06:35 PM
| |||
| |||
| Found the overlap hook worked like a charm thx again. |
|
#9
11-13-2007, 12:07 AM
| ||||
| ||||
| (considering I didn't know what I was doing I think it turned out pretty good) I agree and was not meant as a slam eaither. glad I was of help.Did the AVI help?
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
#10
11-14-2007, 03:51 PM
| |||
| |||
| yep it helped alot. |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| solids toolpaths | piratehcky | Mastercam | 8 | 01-12-2007 06:15 PM |
| Hiding toolpaths... | WilliamD | Mastercam | 3 | 09-17-2006 09:59 PM |
| Associated toolpaths and geometry | Paul G. Swartz | Surfcam | 1 | 09-12-2006 11:42 AM |
| OMG all the toolpaths!!! | dbtoutfit | General CAM Discussion | 6 | 06-18-2006 12:42 PM |
| DeskCNC and Toolpaths | NeoMoses | Carken Products (Deskam, DeskCNC etc) | 7 | 04-23-2003 09:53 AM |
| | |
Linear Mode
