Nesting machined parts

[cncuser1]

I would like to nest machined parts.

Can I specify a distance from one part to another. It seems that MCX2 controls the interpart distance.

I am doing a simple nesting , constant offset in the X direction.

Similar Threads:

• Looking to get some parts machined
• RFQ for 2 machined parts
• Nesting machined part
• Machined parts

[CNCRim]

yes, transform toolpath..... as much time as you like.

[cncuser1]

yes, transform toolpath..... as much time as you like.

But how do I increase the distance between parts?

[cncuser1]

But how do I increase the distance between parts?

I found Nesting>parameters>operations>part-part distance

[cadcam]

I was going to ask if you are using the nesting option or transform. then there is also Rectangler nesting and trueshape nesting options. But you found what you need correct?