Videos

[manuelc149]

What Do You Recomend Mikes Videos Or Steaming Teacher?

[cadcam]

(Steaming Teacher?) is that a video for Porn?
Beleave or not I have not seen Mikes videos would like but have not.
Streaming teacher is preaty good I have seen those.
I have heard good results from both truthfuly.

Mike were's my disk to view?

[Matt Berube]

I haven't used either but it seems that discs you can keep forever are somewhat more valuable than a 90 day subscription...

[dpark1]

Mike's videos are great, I have all of them, and would recommend them

[Mastercam User]

Mike videos. I wish he would do more Mastercam videos on advanced toolpaths.

[manuelc149]

do the videos go over surfacing and which one?

[Mastercam User]

3 axis surfacing but not advanced surfacing toolpath for 4 and 5 axis.

http://www.tipsformanufacturing.com/...d_milling.html

If you are looking to learn surfacing toolpath with Mastercam there is no better place to start than with his surfacing video. I doubt you will ever find anyone who is unhappy with his product.

[cadcam]

I wish he would do more Mastercam videos on advanced tool paths.

This most likely not to happen as he does not make any new Mastercam video's any more as he is a Edgcam dealer now.

What do you want for Advance videos Mastercam User?
Give me a few suggestions and did you get all of mikes Videos all ready?

Cadcam

[manuelc149]

i have no videos but i took a beginers ntma class. i have a lot of use for surfacing so if you have any thing available please let me know. thank you

[Mastercam User]

Originally Posted by cadcam This most likely not to happen as he does not make any new Mastercam video\\\'s any more as he is a Edgcam dealer now. What do you want for Advance videos Mastercam User? Give me a few suggestions and did you get all of mikes Videos all ready? Cadcam

Is there anyone that at one time or another that CNC Software does not screw over or not really appreciate the value of? Cimco, Mike Mattera, etc.? Do not bother to answer. It’s rhetorical question.

I do not have every single one of the videos because I use another program for CAD because I dislike Mastercam solids.

I am not sure why you want my suggestions for advanced videos? Are you planning on filling the gap that is left because Mike Mattera will not do anymore Mastercam videos? If you are when would you be looking to start making them?

[cadcam]

(Is there anyone that at one time or another that CNC Software does not screw over or not really appreciate the value of?) I am not sure were you get your info. Do you have a problem with CNC software. you say don't answer but you throw out crap like this.Sorry if you don't like solids you have been asking about Cam side.

[Mastercam User]

I get my info from talking with CNC Software employees about issues I have with Mastercam and with CNC Software. I have made it very clear that CNC Software squandered a great resource in Mike Mattera and that they did not appreciate what Mike Mattera brought to the table training wise.


Will you be answering the questions I asked you above?