| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
05-26-2004, 10:53 AM
| ||||
| ||||
| I will send you back the post you sent me, modified along with a posted file from that post. The only other thing I can think of is there's a problem with the MP.dll. Get an update here.. http://www.emastercam.com/patches/v91/mp/mpv912.exe
__________________ Matt San Diego, Ca ___ o o o_ [l_,[_____], l---L - □lllllll□- ( )_) ( )_)--)_) (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)  |
|
#14
05-26-2004, 10:57 AM
| ||||
| ||||
| Yes it's in General Output Settings
__________________ Matt San Diego, Ca ___ o o o_ [l_,[_____], l---L - □lllllll□- ( )_) ( )_)--)_) (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#15
05-26-2004, 11:32 AM
| |||
| |||
| loaded the patch and still no good.. Got yours and it works fine with all the line numbers.. I dunno Gotta be something else wrong with my system.. I'm going to try and contact CNC solutions.. Thanks again for your help Rekd |
| Sponsored Links |
| |
|
#16
05-26-2004, 11:59 AM
| ||||
| ||||
| That post I sent you is the one you sent me, with the changes to seqmax and omitseq. You should be good to go with that post.
__________________ Matt San Diego, Ca ___ o o o_ [l_,[_____], l---L - □lllllll□- ( )_) ( )_)--)_) (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Emco Compact 5 PC...have ???? | Double G | Mini Lathe | 42 | 08-22-2010 06:26 PM |
| Upgrading control hardware - Emco | eDudlik | General CNC (Mill and Lathe) Control Software (NC) | 21 | 12-08-2009 12:52 AM |
| Faqnuc 11M Post for Mastercam 9 | Moparmatty | Post Processor Files | 5 | 09-30-2006 06:12 PM |
| BOSS 5 Post processor for Mastercam | bbuonomo | Post Processor Files | 6 | 09-03-2006 12:11 PM |
| Mastercam post to Kellyware Kcam?? | gcamlibel | Mastercam | 0 | 03-09-2004 10:04 AM |
| | |
Linear Mode
