Hello
In your post there is a line that give you the option of r or IJk . It will have a number associated with it Example(1) = r (2) =ijk
It is in the first couple of pages. Change the number to refect the format
you want. Save program out as another name.PST so if you make a mistake you still have the original.
AL
# --------------------------------------------------------------------------
# General Output Settings
# --------------------------------------------------------------------------
sub_level : 1 #Enable automatic subprogram support
breakarcs : yes #Break arcs into quadrants?
use_rigid : 1 #Use Rigid Tapping?
arcoutput : 0 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180
arctype : 2 #Arc center 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc.
arccheck : 1 #Check for small arcs, convert to linear
atol : .01 #Angularity tolerance for arccheck = 2
ltol : .002 #Length tolerance for arccheck = 1