| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-09-2007, 03:06 PM
| ||||
| ||||
Does anyone know how to program two ops at the same time? Lets say your doing one op on one vise and the second on another...can you program so that when you post it the it will use G54. G55 and if you are using the same tool that it will jump from one vise to the other without changing tools...  |
|
#2
06-09-2007, 06:38 PM
| |||
| |||
| On the tool parameters page of the toolpath, Misc values button (bottom of screen) set MI 1 = 2(very top left box) then go to the Planes button on tool parameters page open this, at the bottom of the toolpath coordinate system is offset. 0 = G54 1 =G55 Etc... Steve www.cad2cam.net
__________________ www.cad2cam.net Programmer/ Certified Cam Instructor |
|
#3
06-10-2007, 11:01 PM
| ||||
| ||||
| We need to know What version. and are you going to use WCS for one side and another WCS for the other then when you create them you can set a Offset for each one then when you post it will use the offsets from the WCS for each op and post out. By the way if it is V9 you can go to T/C planes and set the offset there, if in VX you can use the planes button there and do the same. What version and how do you plan on doing you programming style WCS or Diffrent levels?
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CNC programming - HELP | kyo_ysh | General Metalwork Discussion | 3 | 01-11-2010 09:42 PM |
| Programming | chakaloso | Haas Mills | 11 | 03-07-2007 04:34 PM |
| programming a .5 rad | jammer99 | General Metalwork Discussion | 1 | 08-19-2005 08:53 PM |
| API Programming Anyone | Al_The_Man | Computers and Networking | 3 | 02-14-2005 08:31 PM |
| Sub programming | JuiceMan | General CAM Discussion | 3 | 10-08-2003 08:32 PM |
| | |
Linear Mode
