Reply with QuoteWhy does this need to be from an image? I can make mastercam do that without pulling the lines in and driveing them down the center to get this can be done with a simple flat surface for example.
Using Mastercam for single direction raster/zig tool path?
Hi All
Would anyone know whether it is possible to use Mastercam to convert a bitmap into G-code which has a specified toolpath so it were to only machine in one direction of one axis so a one directional raster or zig toolpath (see image below)?
Any advice/help much appreciated for a big newbie to the CNC world
Similar Threads:
Re: Using Mastercam for single direction raster/zig tool path?
Why does this need to be from an image? I can make mastercam do that without pulling the lines in and driveing them down the center to get this can be done with a simple flat surface for example.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
