anyone have MC CIMCO parameters to send to M32 Mazak control?


Results 1 to 3 of 3

Thread: anyone have MC CIMCO parameters to send to M32 Mazak control?

  1. #1
    Member
    Join Date
    Aug 2005
    Location
    usa
    Posts
    124
    Downloads
    0
    Uploads
    0

    Default anyone have MC CIMCO parameters to send to M32 Mazak control?

    Hi All.

    I have an RS232 cable to my V-10 with M32 control. I can get a program from the machine back to my CIMCO editor since I have the parameters from Mazak on how to set up the commmunications.

    However when I try to send into the machine I get "553 tape reader error". Since I get code back to the PC, I think all the big parameters are OK, but of course there are all the little ones in CIMCO and the COM port that are not mentioned in the Mazak documentation.

    The CIMCO software offers the follow choices for "Flow Control"; none, software, hardware and hardware and software

    The COM port in Device Manager offers the following choices; none, Xon/Xoff and hardware.

    Screen shots of your setting screen for the CIMCO and COM port would be awesome but all data is welcome.

    Thanks

    Similar Threads:


  2. #2
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default Re: anyone have MC CIMCO parameters to send to M32 Mazak control?

    Did you get this working? did you call CIMCO support as there are no default parameters to give you that makes it work pacific to a MAZAK.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  3. #3
    Member
    Join Date
    Aug 2005
    Location
    usa
    Posts
    124
    Downloads
    0
    Uploads
    0

    Default Re: anyone have MC CIMCO parameters to send to M32 Mazak control?

    No I didn't get it working actually yet. Mazak does have a publication that purports to lay it all out using an old RS-232 communications software. These is also service tech who is willing to work with me to get thru it. I'll keep you posted.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

anyone have MC CIMCO parameters to send to M32 Mazak control?

anyone have MC CIMCO parameters to send to M32 Mazak control?