I cant set my face mill (FMRCM 4100 HRD) in my MasterCAM !!!

[DSRMUN]

I am a new learner in MasterCAM.

Recently, i have a profile needs to use raster function.

Tool i wish to use is face mill :

Face mill : FMRCM 4100 HRD
Insert : RDCT 1204 MO-MA
Holder : BT 40 FMC 32-60

is it possible to use face mill in raster function ?

The main problem is i cannot set my tool in my MasterCAM, anyone could just show me the way ?

Thanks for helping

Similar Threads:

• Newbie- integrated face mill vs tts face mill
• How to drill and face mill using table type horizontal boring mill
• How boring, Face mill, End mill and Circular Interpolation done on Floor type HBM.
• C - Axis Face Contour w/ Mastercam
• Need Help!- mastercam face contour g112

[cadcam]

Now it maters on the surface you are trying to use Raster on that you would use a face mill. As face mills do not like to plunge as that are not mad for it.
Another thought you gave us a face mill number who makes it. you may want to the vendor site and see if you can get a tool profile from them being a DXF or STP if this is newer Mastercam. or draw a custom profile.

there are some thoughts to start with.

[DSRMUN]

Thanks very much. Maybe i need to redesign the toolpath.