I installed MC 2018 and when I go to Machine > Mill > Manage List, the only machines that show up are default machines.
- this folder is under the MC 2018 install, your original CNC Machines (2017) is in a different location
I opened my old version of MC 2017 and it shows as it should with multiple machines to choose from on all the machine types.
So I then looked in the CNC Machines folder in MC 2018 to be sure there were in fact more machines and there were several listed.
My question is why are they not showing up when I open the Machine Definition Menu Management? I did check the path within the "Current Machine Definition Directory" and that seems correct as well going to C:\Users\Public\Documents\Shared Mcam 2018\CNC Machines\ . It does this no matter which machine type you pick, so what link am I missing?
- you need to setup your 2018 install & update your posts..... run the chook "Updatepost" to read the 2017 items & place the updated items in the correct MC2018 install areas
- you then need to "manage" your machine listing, and verify that the control & posts are linked to the correct machines