Only suggestion is to carry the previous machine into the new session
Open the config file >> Files >> Open with previous machine ( or similar words ) checked [ lower L/H area ]
Hi guys, I would like to know if there is a button for
Quickly access to the next function
Machine Type -----------> Mill --------------> Default
As in the attached image
It's just that I do not like pressing three buttons to do that.
Whether using a key combination like Alt-Key
or
Preferably an icon button
Thank you very much for your help.
Similar Threads:
Only suggestion is to carry the previous machine into the new session
Open the config file >> Files >> Open with previous machine ( or similar words ) checked [ lower L/H area ]
Thanks Superman, at the end program how to start. In Startups Settings.
Now since opening the Mastercam opens as Mill default.
Thanks, we can close this thread
No need to close but you are correct you can make mastercam default into Mill and a specific Machines like the default or another..
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .