Was this when you tried to Verify it?
From some .dxf files floating around for the Aztec Calendar I made my own MCx7 project in 3 layers (center ring, middle ring, outer ring) and when I tried the first tool simulation I get this message:
“Tool operation has undercuts. Please select from UBV / File / Options / General / Simulation Engine, 5 axis in order to get correct results”
I did the simulation anyway and the results looked ok to me
What UBV means and where it’s located?
Similar Threads:
- Search drawing from free piston engine ->stelzer engine
- Need Help!- Help with simulation
- Build Thread- Simulation Done Right
- 5.0 Simulation bug?
- Need Help!- Simulation
Nicolas
Was this when you tried to Verify it?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Yes it is on the verify screen but I found the solution. On the verify screen under the Options menu, General, I click on the Simulation engine and select 3 or 5 axis (makes no difference which one I select).
But out of curiosity I still don’t know what UBV means?
Thanks for the help
Nicolas