Why not just Xform project to plane Select new level
then delete duplicates
Then window chain
Hi all !!
Have a commissioned project requiring pocketing some cross style pastern !
here bellow is only an a sample board for testing and customer approval.
FEW PROBLEMS !!
A - the final board has +/- 30x more of these crosses @_# !
B - the present issue is I'm having some....either brains fade or to much morning caffeine ....I can't find how to properly chain these. I explain !!
The "original" cad come from another source and is imported to MC. !?!
So when selecting the option close chain, it will ONLY take a single branch at the time, not all of the bottom pattern !
OK...I then thought let's select window chaining !!...noP.. !
...
Nop has.....it gives me this ??!....
Again.....it I select single chaining....or even polygon on a one by one basis.....it's ok !?!
Anyone KNOWS how to solved this??
for 5 of those crosses.....one by one is not so....bad !
but for...+/- 300.........DARN !! there must be a ...better way I'm not seeing
Thanks in advance...
Similar Threads:
- Need Help!- HeeksCNC chaining operations?
- help! need to find chaining settings
- Need Help!- chaining a slot
- Need Help!- Chaining problems
Why not just Xform project to plane Select new level
then delete duplicates
Then window chain
Thanks....just what I needed !!
Works !!
...after shoveling over 5hrs from our snow storm ( eastern Canada) and only 4hr sleep.....my brain...is....having missing steps.....
Nice to have support around !
Thanks squirrel !
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Thks for this 2nd option cadcam, much appreciated !
!!
Any Time this how I teach it. making it easy. any chance you are getting solids as the models?
Also I am starting to post more stuff here:
https://www.youtube.com/user/precisionprogramming
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Already a subscriber .....but will push more on the share...as this give you more from Youtube @_# !!
Nice see you are already.
Thanks
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .