How to set up a 1/8-27 NPT tapping in MasterCam

[MrRogue]

Hello,

I'm learning my way through 2017 MasterCam and 2017 MasterCam for SolidWorksPro 2017.

I have parts to machine and each part has 10 1/8-27 NPT threaded holes in it.

I'd like to see an example of this 1/8-27 NPT tap programmed with MasterCam.

need to tap the four larger holes on the part that's in the picture.

Thanks in advance !!

Ron

Similar Threads:

• Need Help!- How to get mastercam lathe v9 to post g84 for tapping instead of g32
• Mastercam tapping issue,
• Tapping threads on VM1- from MasterCam
• Rigid tapping with sl-20 and mastercam X
• Tormach Tapping and Mastercam

[mp5navy]

Hope it help

[MrRogue]

I ended up getting all to work.
Over causious but no broken tools and mainly, No crashed machine !!
Holes are getting tapped.

Hope it help