I have a quick question, how do I program multiple finish passes on a pocketing routine in mastercam? I'm getting some cutter deflection and want to do a couple of extra finish passes to get a straighter wall. I've tried adding extra finish passes in the depth cuts parameter but it only goes out to the finish diameter on the last pass.
Here is a text doc of my program it is a simple pocketing routine and to compensate for additional finish passes I've been adding a contour finish pass. I've been looking for a better way but this is the best I can come up with so far. I eliminated the contour pass from this file so you can see what I started with.