Mastercam posting problem

[Redd]

Hello,

I have changed over from MC9 to MCX(for the second time), I am having problems posting out operations in one program.
If I have a list to 30 or so ops when I select them all and go to post them it selects the first few and then posts a program then it selects another few and so on, the worst part is that they are not in order, or maybe created order, I cannot find where to change the selection masks. I have tried the ones in the config, and in the m/c set up etc.

I will try any suggestion at the moment (within reason :-))

cheers

[Mike Mattera]

You must have saved the file under a new name while working on it. Mastercam is creating new Ops using the new file name. So The Ops all post as different NC files.

Right click on the Ops and select Change NCI destination. Or Change NCI. It will come up with the current file name as the New Op name. Regen them (just to be safe) and post it.

Mike Mattera

[Redd]

Cheers Mike,

I should have asked you two weeks ago would have saved alot of grief.

Redd