Mastercam 2017 Help / Training / Questions


Results 1 to 8 of 8

Thread: Mastercam 2017 Help / Training / Questions

  1. #1
    Member VTPROS's Avatar
    Join Date
    May 2010
    Location
    united states
    Posts
    132
    Downloads
    0
    Uploads
    0

    Lightbulb Mastercam 2017 Help / Training / Questions

    Hey everyone, if anyone has any questions about Mastercam 2017, please feel free to ask me here or PM me. I'm not on this forum as much as i'd like but would love to help in anyway i can.

    I've had 2017 few month before it's released and has become very proficient on it and it's new features and really want to make an effort to help those in need of transitioning.

    If i don't reply back fast enough on here, please PM me as i get a notification with each PM and will be able to respond faster.

    For 2017 Training you're welcome to also check out my website vtpros.net

    Moussa Sleiman
    CEO/Instructor
    vtpros.net

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam 2017 Help / Training / Questions

    We have a proven engraving program that we have used in an NLX lathe. We changed the text in the program and have issues where the text now does not engrave full letters in random spots. We checked the endmill, material, and depth of cut, speeds, and feeds and all are the same. Is it a post processor issue? The class would be grateful for any help.



  3. #3
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by usinf View Post
    We have a proven engraving program that we have used in an NLX lathe. We changed the text in the program and have issues where the text now does not engrave full letters in random spots. We checked the endmill, material, and depth of cut, speeds, and feeds and all are the same. Is it a post processor issue? The class would be grateful for any help.
    Are you programming this with mastercam. We do not know if the post is the issue as we do not have enough info.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  4. #4
    Registered
    Join Date
    May 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam 2017 Help / Training / Questions

    Quote Originally Posted by cadcam View Post
    Are you programming this with mastercam. We do not know if the post is the issue as we do not have enough info.
    The programming was written in MasterCam 17. We were thinking it was the post processor since the letter skips are partial and random. It will lose part of a "A" or extend a "S". It happens in random spots. My other thought it might by the look ahead buffer in the NLX250.



  5. #5
    Registered
    Join Date
    Jan 2018
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam 2017 Help / Training / Questions

    Will most likely be seeking some advice in near future. New to Mastercam Lathe 2017 and I have to create turn profiles from "stp" file and run toolpaths. Started practicing with a Solid Works tutuorial.

    Cam



  6. #6
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam 2017 Help / Training / Questions

    Cam62,
    the turn profile option is there under the wireframe tab.
    But also based on the shapes of your solids you can just use the solid selection option.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  7. #7
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    59
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam 2017 Help / Training / Questions

    I have personally used VTPROS ,,,purchased from a website Electronics, Cars, Fashion, Collectibles, Coupons and More | eBay ,,purcashed mastercam dvds and they are spot on,,,i typically use alphacam when i do my installs,,,but these guys are spot on,,,



    keysoftwareservice.com



  8. #8
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam 2017 Help / Training / Questions

    Thank you for your input.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mastercam 2017 Help / Training / Questions

Mastercam 2017 Help / Training / Questions