Mcam9 Slow In New Laptop

[Dugg]

My laptop is so old and heavy, I put it in the back of my truck for better traction in the snow...... on the way to the ski lift.

[tobyaxis]

Originally Posted by Dugg My laptop is so old and heavy, I put it in the back of my truck for better traction in the snow...... on the way to the ski lift.

Mine is 8Lbs alone and about 15 in the bag with the rest of the adaptors. The Dell M90 Precision WorkStation is the same weight, go figure. That must be why they make an over the shoulder carrying strap LOL.

[ObrienDave]

Originally Posted by DELL hi dave, i'm not sure how to do that. a little heads up please. thanks, vito lore

Open "My Computer".
Right click on the drive you have MasterCam installed on and select "Properties".
Under the "Hardware" tab click the "Properties" radio button.
Under the "Policies" tab you should see a check box to "Enable write caching on the disk".
Un-check the box.
Press "OK" radio button once for each window.
Re-boot your computer.

[tobyaxis]

Originally Posted by ObrienDave Open "My Computer". Right click on the drive you have MasterCam installed on and select "Properties". Under the "Hardware" tab click the "Properties" radio button. Under the "Policies" tab you should see a check box to "Enable write caching on the disk". Un-check the box. Press "OK" radio button once for each window. Re-boot your computer.

Can just anyone do this to speed up the saving for any Software, like BobCAD/CAM?

Sorry for the BCC question but you seem to be the person to ask about the Topic.