| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-04-2007, 08:35 AM
| |||
| |||
i have a problem creating a toolpath for a curve.. the curve is on the Z axis... what i mean is that it gets higher and lower... i thought i was supposed to use a ball endmill.... but someone post back... tell me which bit i should use... and how to create the toolpath  these things are cool    |
|
#2
01-04-2007, 09:35 AM
| ||||
| ||||
| Well without seeing the sahp I could say use a ball and use Toolpathe ,Surface ,Finish Parriall.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
