| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-01-2006, 03:47 PM
| |||
| |||
| Projecting lettering to a surface I have a dome shaped surface that a want to project lettering to. I post the toolpath as an .nci file and project it to the surface. The lettering is the shape of the surface but is above it. We were very tempted to start playing with our z values but thought better about it. We are using v9. Please help!    |
|
#2
12-01-2006, 04:27 PM
| |||
| |||
| I would be happy to look at it bleuenberger@tfs.textron.com if you do send it to me, dont zip the file. |
|
#3
12-03-2006, 02:11 PM
| ||||
| ||||
| Do a surface finish project and use the option of curves pick the curves. Here is a sample
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
