X5 in Windows 10

[maquiza]

Hello, I am working with Mastercam X5 in Windows 7 profesional. Now I can get the new Windows 10, but I do not know if Mastecam X5 can work with it.
Can someone tell me if I can use X5 in Windows 10?

Thanks,

Jorge

Similar Threads:

• windows 8
• x64 windows 7
• DX/32 in Windows XP...
• v9.0 help with windows XP?
• Windows XP or Windows 2000 better with Mach2

[minicncuser]

It should work fine But if you have any problems you can roll right back to 7

[Superman]

PDF from CNC Solutions say it X5 is usable on XP, Vista, & Win7
Windows 10 is not mentioned, as it didn't exist then

- You can only try

[Robert M]

I would wait for W10 to be "debugged".....before "hurry" to make the w10 jump !
Eventually, MasterCam will make there's work and support it....like many software...
Patience always pays.....running....your risking to "trip" !!
My 2 ct ;0)

[cadcam]

Mastercam will not update X5 to run on Windows 10 support. I would say most likey it will run. I have X6 thru X9 running with no issues at this time.

[hectorm1randa]

Hi
I upgrade to Windows 10, everything runs ok but MCX5. This software become so slow almost impossible to work with. I delete the MC software and reloaded thinking this will solve the issue but same results... So my advise is to keep your PC as is right now
BR