LinkBack URL
About LinkBacks
In the samples directory under mastercam
| | |
Can anyone tell me where to find mastercam mill samples all levels or tell.me where to find samples and tutorials?
Engrsc@yahoo.com - to send -me files.
Thanks all
In the samples directory under mastercam
Like Gary said
C:/Mcam9/Mill/MC9/Samples/
I'm still new to MC so if there is something missing it is Gary's fault
Just kidding Gary
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
i want more samples, indstry and real aplication of mastercam , thanks
I maybe able to dump something out of my head for you, but it is difficult to judge someone elses Machining Levels. Lets just say it can get pretty scary LOL.Originally Posted by engrsc
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
I me a newbie but need to know fast all about mastercam and need a lot off exercises to exercite and teach
That is a tough one. It is almost impossible to become a Wizard on any CAD/CAM in a few lessons. Most don't start getting really good until a year or two. There is so much in MC. Plus 18 year Vets are still learning new stuff. You just have to keep playing with MC. Come up with some basic parts at first then make parts with a higher difficulty. That is the way most people learn.
one step at a time
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
can you indicate me a site or ftp site with parts to pratice?
Why yes, I can
http://cadcamtrainer.com/forums/showthread.php?t=43
The file extentions are IGES, DWG, DXF, STEP, and BCC
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
htt
p://www.sarasota.k12.fl.us/brookside/cudacountry/assets/applets/mcx_0toc.pdf
I know were there are gigs of MC file from V8 to VX2 and prints and videos and hole lot more.
But it is not at cadcamtrainer that is for sure.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
So 6105moss there is a page and nothing else do you work for the middle school?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
Posting Permissions
| | |
