Hi,<br>
I am trying to do a copy of a curved surface in Mastercam (Finished Surface Copy). I did that before but the surface was always concave or only inclined. The results were great depending on the distance between each path. Now with a convex surface is working so bad. I attach a picture. Is doing the circumference like if it was made of different lines. Like if it was a really bad definition. <br>
I am working with a Fanuc control Series OI-MC.<br>
The space between each path is 0.15mm, the tool is spherical 10mm diameter.<br>
At the simulation it looks pretty good. Could be the post processor? I have tried with two diferent ones MPFAN and MACH3.<br>
Or maybe something about the resolution of Mastercam?<br>
<img src="http://www.cnczone.com/forums/attachment.php?attachmentid=279532&stc=1" border="0" alt=""><br>
I hope you could help me.<br>
Thank you in advance.

Similar Threads: