TOOL LIBRARY'S for MasterCam

[MrRogue]

Hello,

I was wondering IF there are some Tool Library's that can be downloaded an loaded into MasterCam.

I have an older version of MC (9.1) and it has a library but it is not complete.

Most drill sizes are there, EndMills, an several others but to make it complete I'd like to load up a good selection of Radius tool, Ball endmills, ext...ext...

Rather then creating a ton of tools to choose from, I'd like to find a standardized library that is for the most part complete to load into MC.


What are the chances this library is out there for download.... Is it ?





Thanks,
MrRogue

Similar Threads:

• Need Help!- Add fly cutter to mastercam tool library
• Mastercam 9 Tool Library
• CNC Tool Library (Creation of ISO 30 Tool Holders)
• Need Help!- Mastercam tools library
• Mastercam library downloads?

[JIMMY]

That is a hard question to answer. Each company has different tools and feed and speeds. To have a library setup already would be nice. There might be some generic ones out there but it probably will not match what you do. The best way to do it is make one yourself.