| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mastercam Discuss Mastercam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-17-2006, 01:31 PM
| |||
| |||
How do you hide existing toolpaths? I get so many operations going, that I can't clearly see the lines I need to make other operations. There must be some way. I couldn't find anything in the help file or in this forum. Any help would be greatly appreciated!  |
|
#2
09-17-2006, 01:45 PM
| ||||
| ||||
| Put the curser in the main window then hit "Alt" & "T" and it will togle them off. What version are you running as there are other ways to?
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |
|
#3
09-17-2006, 07:51 PM
| |||
| |||
| If you are using X Mr2, there are two new tabs in the ops manager. One shows the toolpath for the selected operation, and the other shows the geometery associated with selected toolpath. You can get more info on the mastercam web page, they have videos showing this. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
