Mastercam with *old* Hurco CNC Miller - Page 3 - CNCzone.com-The Largest Machinist Community on the net!

Mike Mattera · #25 04-19-2006, 11:29 PM

ReValveiT

Below is a tutorial that will explain what you need to do to modify your post. Look in the format ( fs ) section. Hope it helps

http://www.mmattera.com/mastercam/index.htm

Mike Mattera

Stu_M3 · #26 05-19-2006, 07:01 AM

We have an old hurco and also a hawk the only difference we have found in coding is that the old model will only accept one "G" code per line.

Stu_m3

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using your CNC Mill as a CNC Lathe	lstool	Knee Vertical Mills	10	08-02-2010 12:06 AM
Making money with CNC	Johnuk	CNCzone Club House	26	12-13-2009 10:46 AM
Mastercam Jingle Bells	Rekd	Mastercam	3	01-02-2005 01:20 PM
The start of a big CNC project...	UKRobotics	General Metal Working Machines	10	09-30-2004 05:34 PM
Mastercam and CNC PLasma Cutting	comanche1	Mastercam	4	06-04-2003 12:26 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)