Have you tried contacting your Mastercam Dealer for a post change for V8 to run with the machine?
Hey all, I'm new here and new to Mastercam - please be gentle!
I'm having problems running my very old Hurco CNC miller with Mastercam v8. My machine is one of the early 'manual G-code input' ones, but I am able to run it with an old DOS version of Mastercam (v2 I think!)
Thing is, when I try to use the Hurco post-processor that comes with Mastercam 8, it seams to be generating different codes to the ones generated with v2. My Hurco just throws up input errors when I try to upload to it.
Does anyone know what the problem is? I'm guessing that Hurco have changed their G-code standard somewhere down the line - but I'm just guessing. Does anyone have a post-processor that will work with my Hurco? or any info on how to 'edit' the existing one in v8?
Like I said, I'm still very new to all this, so any info would be greatly received.
Many thanks for any input!
Similar Threads:
Have you tried contacting your Mastercam Dealer for a post change for V8 to run with the machine?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Just for a try make a copy of your V2 post then run the post update for your
V8
just a wild gess
Michael J
CHANCES ARE IT OUTPUTTING DECIMAL POINTS AT THE END OF ALL YOUR FEEDS IE F100. SHOULD BE F100 NO DECIMAL POINTS
TRY THIS ON WHAT YOU ARE PRODUCING IN YOUR POSTED TOOLPATH IF YOU WANT EMAIL ME YOUR POSTED FILE I WILL TELL YOU WHAT IS WRONG
I HAVE A HURCO BMC 20
BEST REGARDS
PETER
Thanks for your replies everyone, but I'm still no closer to solving this one...
Here are the G's generated by each version of Mastercam (and their respective Post's) By the way, I have tried opening v2's Post from within v8, but I just get an error and it won't open
Here's v2's G's (these WORK with my Hurco):
______________________________________
%
G90
G40
G71
M25
T1M06
G00 X25. Y0. S2000 M03
G01 Z-1. F50
G03 X-25. Y0. I0. J0. F200
G03 X25. Y0. I0. J0.
G00 Z0.
M25
M09
M5
M2
_______________________________________
And these are the codes for the SAME '25mm radius by
1mm deep' job generated in v8's Post:
_______________________________________
%
N10 G70 G75 G90
N12 G0 T1 M6
N14 G0 X25. Y0.
N16 S2000 M3
N18 Z10.
N20 G1 Z-1. F50.0
N22 G3 X-25. I0. J0. F200.0
N24 G3 X25. I0. J0.
N26 G0 Z10.
N28 M5
N30 G0 M25
N32 M2
E
_______________________________________
Any more thoughts guys? This one's driving me nuts!
have you tried talking to mastercam to modify to
your requirements?
they should have one for your machine?
you can modify the post file yourself in notepad or wordpad
so it outputs what you want as the post files in mastercam
are gerenic and you can adjust to suit
******CAUTION*****
GET YOUR HURCO PST FILE SAVE IT HAS ANOTHER FILE NAME
AND MODIFY YOUR SAVED FILE THAT WAY YOU DONT MESS YOUR ORIGINAL FILE
you can email your post file with asample of what you require
and i will adjust it for you
but you should really contact mastercam to do it then you will know for the future what you need to do if you get another controller like you requested you are new to cadcam and asked the forum to be gentle with you
CONTACT MASTERCAM
regards
peter
Did you try the first suggestion?Thanks for your replies everyone, but I'm still no closer to solving this one...
Again, check with your reseller first. Contacting Mastercam won't do it, they will tell you to go to your reseller.
'Rekd
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
DONT SEEM TO BE HELPFULL TO THERE USERS
send me your post file i will help you
regards
peter
Yes guys - I HAVE tried contacting my re-seller (only one in the UK) and they aren't interested because I'm not on the latest version!?! (9)
Peter:
Thanks greatly for your offer of help! Would you be able to modify v8's post from the info within my v2 post??? If so, I could email both of them to you...
Thank you all for your continued help; I really have very limited knowledge on this stuff.
PLMK, Peter.
yes
email me both
regards
peter
Thanks Peter!
Could you please email me your email address to:
My email
Thank you kindly.
Um, huh?Originally posted by peter
DONT SEEM TO BE HELPFULL TO THERE USERS
peter
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
If you would have said this earlier, your problem would likely have been solved by now.Originally posted by ReValveiT
Yes guys - I HAVE tried contacting my re-seller (only one in the UK) and they aren't interested because I'm not on the latest version!?! (9)
Peter:
Thanks greatly for your offer of help! Would you be able to modify v8's post from the info within my v2 post??? If so, I could email both of them to you...
Thank you all for your continued help; I really have very limited knowledge on this stuff.
PLMK, Peter.
If Peter is unable to help you, there are other options.. let us know how it works out.
'Rekd
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I APPOLAGISE BUT ITS THERE USER THAT NEEDS HELPOriginally posted by Rekd
Um, huh?
Mastercam has one of the best suppor systems in place for CAD/CAM products.Originally posted by peter
I APPOLAGISE BUT ITS THERE USER THAT NEEDS HELP
CNCzone is HERE TO HELP people.
That was an un-fair statement. All we did was suggest he CONTACT HIS RESELLER FIRST.
'Rekd
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
IT WAS UNFAIR I,AM SORRY
Well, Peter is 'the man' !!!
Thanks to Peter, I now have Mastercam speaking the same lingo as my Hurco. THANKS AGAIN PETER!!!
Top geezer indeed...
Good job peter.
PEACE
Last edited by hardmill; 09-12-2003 at 01:51 PM.
Yays!!
'Rekd
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hmmm from the UK. Last name is'nt "PAN" by any chance is it?Originally posted by hardmill
Good job peter.
Could'nt help that one.
PEACE
Last edited by hardmill; 09-12-2003 at 02:19 PM.