Mastercam with *old* Hurco CNC Miller

[hardmill]

Sorry 'bout that I can be a smart ass sometimes

PEACE

[peter]

hi
glad everything sorted out
rekd hope i did not affend anybody?
hardmill thankyou
like your sense of humor i'am like peter pan but only in how old it is
keep up the good work guys
we have another satified customer
regards
peter

[smellyfeet]

Hi,

What was the problem in the end? I am having a prob with my Hurco BMC 20 the post processor I have is driving me crazy as I have to spend ages on the machine editing.

Thanks.

[peter]

you need to contact your reseller he should be able to sort it for you
have done it before to help
but to much assel given to assit
sorry peter

[Mike Mattera]

ReValveiT

Below is a tutorial that will explain what you need to do to modify your post. Look in the format ( fs ) section. Hope it helps

http://www.mmattera.com/mastercam/index.htm

Mike Mattera

[Stu_M3]

We have an old hurco and also a hawk the only difference we have found in coding is that the old model will only accept one "G" code per line.

Stu_m3