3d STL error opening - CNCzone.com-The Largest Machinist Community on the net!

Sanghera · #1 12-18-2005, 02:32 PM

Hi all,
I was working on a model and everything was fine and opening. Then I re-opened a file and tried to make g-code. It said error could not open and it says error producing solid face. Here is an example part. Does it open for you, when you open from toolpath, surface, then select CAD as y, and then any toolpath and then open it.
Thanks.

Sanghera · #2 12-18-2005, 03:14 PM

What I'm trying to say is that it opens fine sometimes while not fine at others.
Thanks.

dmealer · #3 12-18-2005, 07:54 PM

It opens fine for me

Sanghera · #4 12-18-2005, 11:35 PM

hmmm, it seems that sometimes it works, others it doesn't. I restart my computer do the exact same thing, it works, then try again and it doesn't. Not sure what the problem is.
Thanks though.

cadcam · #5 12-26-2005, 10:42 AM

is this in V9 or VX?

Sanghera · #6 12-26-2005, 02:02 PM

In V9 it seems to only work once in a while.
Thanks.

cadcam · #7 12-26-2005, 07:19 PM

I was asking as VX seems to support it better.
Are you running Just V9 or say V9.1sp2 or later being Maintance releases? There had been some updates on this issue.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)