LinkBack URL
About LinkBacks
Look under System Configuration > Shading
Hi. I am wondering how to get an STL file to shade or look solid once you open it up in MX5. When I save a solid as an STL then open it, I cant make it translucent or a solid color. Any help would be great. Thanks.
Look under System Configuration > Shading
http://www.kirkcon.com/
I apologize. I misread the original question. You cannot effect shading on STL. STL is stereo-lithography file, not a solid. MasterCam only does shading on solids such as STP.
http://www.kirkcon.com/
Please follow my picture.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
PS I forgot to change the collor like I did on this STL I right clicked on color and put a window around the part and selected the new color. and now it is orange now.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
Posting Permissions
| | |
