cadcam i got your e-mail and responded to it with the Mastercam and Solidworks attachments.
cadcam i got your e-mail and responded to it with the Mastercam and Solidworks attachments.
locating multiple parts on fixtures in mastercam is an extensive topic. do you use file merge or change recognition or some other method? change recognition gives more choices for positioning if you use the define matching coordinate frames option. also like option to toggle between incoming file and original file. when you toss solidworks into the mix even more options. probably you have other ways i have not even considered.
Here is a link to your file it is a zipped file.
Also review picture.
http://www.mastercam.us/spooncadcam.zip
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
Joe , I would not today as I am in the middle of programming and then have to leave to teach. but I can review tomorrow morning if you want.
Also are you intersested in seeing a free webanar on Mastercam this weekend if so send me an email for a link?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .